DNS Setup for Dynalink
How to let your Dynalink/Netcomm Modem obtain DNS automatically
Open your web browser and type IP address: 192.168.1.1 into the address bar and push enter key on your keyboard. You will see the login pop up box if there is no network problem. Type admin for the username and admin for the password(if you changed your modem login to specific ones please use them instead)
-
After you login to Dynalink/Netcomm modem, you should see the home page of the modem which could be similar as the following picture.
-
Click on Advanced button on the top, you will see following screen.
-
Click on Internet link on your left hand side you will see the following screen.
-
Click on DNS server link under Internet section on the left hand side you will see the following screen. Make sure tick Enable Automatic Assigned DNS settings and click on Apply button below. Now you have done the DNS settings for your Dynalink/Netcomm modem and you can feel free to close the window.
Loading tweets...
